Marine electronics you can trust—backed by experience.
Skip to product information
Out of stock
Simrad NMEA 2000 In-Line 120-Ohm Micro-C Terminator (000-15385-001)
Manufacturer Part:
000-15385-001
$ 33.95
Full Factory SIMRAD Warranty
The Navico 000-15385-001 is a critical network component used to provide proper 120-ohm impedance matching at the end of an NMEA 2000 (N2K) backbone. Unlike standard end-cap terminators, this in-line version allows a device at the extreme end of a network to be connected through the terminator itself, effectively closing the circuit while still facilitating data flow to the final unit.
It is commonly used in space-constrained installations or when a network run extends to a remote location—such as up a mast to a wind sensor or to a rudder feedback unit at the transom—where a traditional T-connector and end-cap would be too bulky.
Key Features:
- Space-Saving Termination: Combines the function of a T-connector and a terminator into a single, streamlined in-line component.
- Impedance Matching: Includes a 120-ohm resistor to prevent signal reflection and ensure the integrity of the NMEA 2000 data stream.
- Strategic Placement: Replaces one of the two standard end-cap terminators required for a healthy NMEA 2000 network.
- Durable Construction: Fully waterproof and marine-grade for reliable performance in harsh, high-vibration environments.
Specifications:
- Part Number: 000-15385-001
- Resistance: 120 Ohms
- Connector Type: Micro-C (Standard NMEA 2000 5-pin)
- Compatibility: Works with all NMEA 2000 certified devices from Simrad, Lowrance, B&G, Garmin, and more.
- Installation Note: Do not exceed 6 meters (approx. 20 feet) of NMEA 2000 cabling between this in-line terminator and the final product at the end of the network