Rhodan G52W48120 G5.2 GPS Anchor 120 lb Thrust Saltwater Trolling Motor, 48V, 120" Shaft, White

The Rhodan G52W48120 Gen5 V2 GPS Anchor trolling motor is a white, 48V bow-mount system with a 120-inch shaft engineered for boats that need dependable GPS positioning and controlled low-speed maneuvering. It combines virtual anchoring with manual steering, heading-based track operation, route memories, a wireless control fob, and app-based operation. The 120-inch shaft is intended to help keep the propeller submerged on boats with higher bow profiles, while the integrated sliding mount provides more flexible stowage and deployment.

Key Features & Benefits

• HD GPS Anchor Positioning: Automatically adjusts steering and propulsion to work toward holding the bow near a selected GPS location in changing wind and current.
• Precise Anchor Jogging: Directional commands in Anchor Mode shift the target anchoring position in 5-foot increments.
• Multiple Navigation Modes: Manual, Anchor, Track, and Route modes support direct control, position holding, heading control, and stored-path use.
• Wireless FOB and Mobile App: Operate the motor from the included Bluetooth wireless controller or the Rhodan app for compatible iOS and Android devices.
• Onboard E-Paper Display: Base-mounted display and buttons report battery voltage, current draw, thrust setting, GPS data, wireless status, and diagnostic messages.
• Integrated 10-Inch Sliding Base: Sliding base moves the motor forward and backward between locked positions to assist deployment, stowage, and dock clearance.
• MFD Connectivity: Gen5 supports compatible Simrad, Lowrance, and Raymarine multifunction-display integration; configuration depends on the connected system.
• Saltwater-Ready Construction: 316 stainless steel steering components, protective lower-unit coating, composite shaft, and sacrificial anodes support demanding marine use.
• Weedless Propeller and Speed Control: Three-blade weedless propeller with 32 forward and 16 reverse speed settings for fine maneuvering.
• Made in Sarasota, Florida: Rhodan manufactures and supports Gen5 motors in Florida using U.S. and globally sourced components.

Technical Specifications

• Operating voltage: 48V DC
• Shaft length: 120 in
• Housing color: White
• Mounting location: Bow
• Mount style: Integrated sliding quick-release base
• Function: GPS-guided electric trolling motor
• Motor current draw: 0–50A, depending on thrust setting
• Recommended circuit breaker: 60A rated for the installed system voltage
• Propeller: Three-blade weedless
• Forward thrust settings: 32
• Reverse thrust settings: 16
• GPS anchor memory locations: 4
• Additional route/anchor memory locations: 8
• Total memory locations: 12
• Anchor jog increment: 5 ft
• Mount slide travel: 10 in
• Control methods: Wireless Bluetooth fob, onboard keypad, Rhodan app; compatible MFD integration
• Display: E-paper HMI at motor base
• Steering components: 316 stainless steel with patented clutch mechanism
• Shaft: Flexible composite
• Water type: Saltwater and freshwater
• Manufacturer location: Sarasota, Florida

Compatibility

Requires a dedicated 48V DC trolling motor power system, with batteries, cabling, and 60A overcurrent protection sized for the installation. The 120-inch shaft should be matched to the boat’s bow height and expected offshore operating conditions; shaft length alone does not establish vessel suitability. Compatible MFD control is available through supported Simrad, Lowrance, and Raymarine equipment. The motor is not a direct 12V or 24V substitute. The optional Rhodan SRQ mount is an accessory, not the same as the included sliding quick-release bracket.

Installation & Setup

Measure bow height and select a mounting position with sufficient swing, deck reinforcement, and underwater propeller clearance. Secure the quick-release mount, route wiring above decks using manufacturer-recommended cable sizing, and fit a 60A breaker appropriately rated for the system voltage. Perform the manufacturer’s GPS/compass and motor calibration procedures before relying on automatic anchor or track operation; maintain the lower unit, anodes, and propeller as instructed. Disconnect motor power before charging or maintenance.

Warranty

5-Year Limited Warranty

What's in the Box

• Gen5 V2 GPS Anchor trolling motor with 120-inch shaft
• Wireless control fob with lanyard
• Sliding quick-release mounting bracket
• RAM-style motor stabilizer mount
• Three-blade propeller kit