Marine electronics you can trust
Mastervolt BI 703 BI Series 70A Battery Isolator - 1 Input, 3 Battery Outputs (83007030)
The Mastervolt BI 703 BI Series battery isolator distributes charge from one alternator or battery charger to 3 independent battery banks while preventing current from flowing between the banks. Its conventional solid-state diode design makes it a practical solution for marine electrical systems with separate starting and house batteries that share a charging source. This model is rated for alternators up to 70 amps or battery chargers up to 50 amps, with an aluminum heat-sink housing and encapsulated electronics for durability. This version does not have a separate compensation diode, so the charging source must be able to accommodate the approximately 0.6V diode voltage drop through its own regulation. Its bolt-style terminals support secure installation in a fixed battery-management system.
Key Features & Benefits
- Independent battery charging: Distributes charge to 3 separate battery banks
- Alternator compatibility: Rated for up to 70A alternator output
- Battery-charger compatibility: Rated for up to 50A charger output
- Reverse-current blocking: Prevents one battery bank from discharging into another
- Solid-state design: No mechanical switching contacts to wear
- Corrosion-resistant construction: Aluminum heat sink and protected electronics
- Compensation diode: Not included on this model
Technical Specifications
- Series: BI conventional diode battery isolator
- Charging inputs: 1 alternator or battery charger
- Battery outlets: 3
- Maximum alternator output: 70 A
- Maximum battery-charger output: 50 A
- System compatibility: 12V or 24V DC
- Technology: Diode-based solid-state isolation
- Typical forward voltage drop: Approximately 0.6V
- Compensation diode: No
- Dimensions (H × W × D): 207 × 140 × 80 mm
- Weight: 1.1 kg (2.4 lb)
Compatibility
For 12V or 24V systems where one charging source serves 3 batteries or battery banks at the same nominal voltage. Charging sources with an adjustable regulator or suitable voltage-drop compensation are recommended. This BI 703 configuration has no dedicated compensation-diode terminal.
Installation Considerations
Install in the positive charging lead using correctly rated cable, protective devices and secure terminal connections. Allow space around the heat sink and verify voltage-drop compensation according to the charging source manual.
Warranty
2-Year Limited Manufacturer Warranty