Lumishore ECLIPSE SNL100 1m Blue Cut-and-Seal Neon Flex Marine LED Strip Light (60-0511-1000, 010-04489-00)

The Lumishore ECLIPSE SNL100 blue Neon Flex light creates a continuous, dot-free lighting line for accent applications on boats. This 1m cut-and-seal version uses a fully encapsulated, marine-rated flexible housing that can follow supported straight and gently curved surfaces.

Key Features & Benefits

• Continuous Neon Appearance: Spot-free diffuser smooths the appearance of individual LEDs for a continuous illuminated strip.
• Flexible Marine Installation: Cut-and-seal construction can be adapted to the planned run; use approved clips and seal exposed ends.
• ECLIPSE Integration: Compatible with the ECLIPSE Command Center for organized zone control and dimming.
• Moisture and UV Resistance: IP68 encapsulated construction is UV-resistant and salt-spray tested.
• Dedicated Light Color: Provides blue accent illumination for a coordinated vessel lighting layout.

Technical Specifications

• Nominal strip length: 1m
• Light color: Blue
• Supply voltage: 12V DC only (10–15V DC)
• Maximum current: 0.5A per meter (at 12V)
• Calculated maximum current for this length: 0.5A
• Power: 6W per meter; 6W for this length
• Ingress protection: IP68
• Illuminated section: approximately 12 x 6.1mm
• End cap dimensions: 14 x 8mm
• Strip mass: approximately 86g per meter
• Construction: fully encapsulated and potted with spot-free diffuser
• UV resistant: yes
• Salt-spray tested: yes
• Mechanical installation: cut, seal and secure using stainless steel mounting clips

Compatibility

• ECLIPSE Command Center (60-0495), optional 1- or 2-zone ECLIPSE expansions
• Compatible 12V switching arrangement; color selection from a switch applies to Blue/White version
• Not a 24V strip and not interchangeable with LUX lighting drivers

Installation & Setup

• Plan mounting clips and bend paths without sharply kinking the strip.
• Cut only at the manufacturer-designated intervals and seal the ends using the approved process.
• Size circuits for maximum draw and protect joints and power wiring against moisture.