Skip to product information
Lowrance Yamaha Engine Interface Cable for NMEA2000 (000-0120-37)
  • Lowrance Yamaha Engine Interface Cable for NMEA2000 (000-0120-37)
Lowrance Yamaha Engine Interface Cable for NMEA2000 (000-0120-37)

Lowrance Yamaha Engine Interface Cable for NMEA2000 (000-0120-37)

Manufacturer Part: 120-37
UPC: 042194529820
5 left
$ 122.95 $ 123.00
Full Factory Lowrance Warranty

Factory Authorized Dealer

25 Years of Excellent Customer Service and Support

The Lowrance 000-0120-37 is a 15-foot (4.5-meter) Yamaha Engine Interface Cable designed to connect compatible Yamaha outboard engines directly to an NMEA 2000 network. This cable allows boaters to monitor real-time engine diagnostics and performance data on their chartplotter or multifunction display without the need for specialized engine gauges.
 
Key Features
  • Engine Data Monitoring: Transmits vital engine information including RPM, alternator voltage, engine hours, engine temperature, fuel rate, oil pressure, and trim to your display.
  • Direct Engine Connection: Connects to the 4-pin data connector located under the engine cowling of compatible Yamaha outboards.
  • NMEA 2000 Integration: Standard Micro-C connector plugs into any existing NMEA 2000 network backbone.
  • Wide Compatibility: Generally compatible with Yamaha four-stroke models (F50–F350) and two-stroke HPDI models from 2006 and newer.
  • Rugged Design: Built with marine-grade materials to ensure long-term reliability and resistance to corrosion and heat under the engine hood.
 

Connects to Yamaha engines without Yamaha CommandLink Plus system.

  • 2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250.
  • 2006 & newer: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300.

Outputs:
Yamaha 4-Stroke 50-250 | 2-Stroke HDPI 150-350

  • RPM
  • Alternator
  • Voltage
    Engine Hours
  • Engine Temperature
  • Fuel Pressure
  • Fuel Rate
  • Oil Pressure
  • Trim*
  • Water Pressure

    *Digital trim must be connected by a Yamaha dealer.

    *Requires NMEA 2000 network. Kit includes T-connector to connect to a new or existing NMEA 2000 network. Add NMEA 2000 starter kit, part number 000-0124-69, if a network is not already installed.

    Works with: NMEA 2000 Compliant Units
What's in the Box
  • 15-Foot (4.5m) Yamaha Engine Interface Cable: The primary cable with a Yamaha engine-specific 4-pin plug and an NMEA 2000 Micro-C connector.
  • NMEA 2000 T-Connector: One standard T-connector is required to add the interface as a new drop on a network backbone.
  • Documentation: Installation guide and a list of supported engine data parameters.

Related products