JL Audio M6-10W-C-GwGw-4 10" 250W RMS Enclosure-Optimized Marine Subwoofer, White Classic Grille (010-03487-00)

The JL Audio M6 10-inch marine subwoofer delivers powerful low-frequency performance for premium boat audio systems. This W-series driver is optimized for use in a properly designed sealed or ported subwoofer enclosure, rather than unrestricted free-air mounting. This version features a white classic grille without built-in lighting.

Key Features

• 250W RMS continuous power handling and 4-ohm nominal impedance
• 10" injection-molded, mica-filled polypropylene cone with synthetic rubber surround
• White Classic marine grille and corrosion-resistant construction
• Purpose-designed for open-air marine listening environments
• Removable grille and trim ring for installation access
• Enclosure-optimized motor system for controlled bass in a correctly sized box

Technical Specifications

• Driver size: 10"
• Continuous power handling: 250W RMS
• Nominal impedance: 4 ohms
• Grille: White Classic
• RGB LED lighting: No
• Cone: Mica-filled polypropylene
• Surround: Synthetic rubber
• Overall diameter: 10.75" (273mm)
• Mounting cutout diameter: 8.875" (225mm)
• Mounting depth: 5.90" (150mm)
• Weight: approximately 12.6 lbs (5.7kg)
• Sensitivity: 86.4dB (1W/1m)
• One-way linear excursion (Xmax): 0.52" (13.2mm)
• Recommended amplifier power: 75–250W RMS
• Free-air resonance (Fs): 34.58Hz
• Total Q (Qts): 0.496
• Equivalent compliance (Vas): 1.22 ft³ (34.49L)

Installation & Compatibility

• Use a compatible 4-ohm-stable subwoofer amplifier and an appropriate low-pass crossover.
• Verify the required mounting diameter, depth, and structural support before cutting the mounting surface.
• A properly designed sealed or ported enclosure is required for the intended performance; do not treat the W version as interchangeable with its IB counterpart.

What's in the Box

• One JL Audio marine subwoofer
• One White Classic grille and matching trim ring
• Six stainless-steel mounting screws
• Six stainless-steel washers