JL Audio AP600/6 600W RMS 6-Channel Full-Range Class D IP67 Marine Amplifier (010-03430-00)

Power a multi-zone marine audio installation with the JL Audio AP600/6 compact 6-channel Class D amplifier. The staggered-power design provides four standard channels plus two higher-output channels, creating useful flexibility for onboard speakers and a bridged subwoofer.

Key Features

• 600W RMS combined output at 2 ohms across six channels
• Staggered output permits higher-power channels 5 and 6
• Bridgeable channels allow alternate speaker and subwoofer configurations
• Built-in LCD setup and compatible Easy Tune support
• Ignition-protected IP67-rated amplifier body, excluding wiring

Technical Specifications

• Channels: 6
• RMS at 14.4V, 4 Ohms: Channels 1–4: 50W RMS x 4; channels 5–6: 100W RMS x 2
• RMS at 14.4V, 2 Ohms: Channels 1–4: 75W RMS x 4; channels 5–6: 150W RMS x 2
• Bridged RMS at 14.4V, 4 Ohms: Channels 1–4: 150W RMS x 2; channels 5–6: 300W RMS x 1
• Dimensions: 11.81" W x 5.90" D x 1.86" H
• Fuse Rating: 70A
• Amplifier Class: Class D
• Input Voltage: 9–16V DC
• Environmental Rating: IP67 (amplifier body; excludes cables)
• Operating Temperature: -4°F to 149°F (-20°C to 65°C)
• Frequency Response: 20Hz–20kHz (+0/-1dB)
• RCA Input Sensitivity: 0.2–2V RMS (low); 0.8–8V RMS (high)
• Protection: Under/overvoltage, overtemperature, output short circuit
• Minimum Power/Ground Wire: 4 AWG copper
• Manufacturer Warranty: 3 years

Compatibility

Compatible with suitable marine stereo preamp outputs and properly matched 2- or 4-ohm speakers. Easy Tune features require an appropriate compatible DSP source and Garmin Audio configuration.

Installation Notes

The total load must meet specified impedance requirements for the selected wiring topology; use suitable 4 AWG or larger copper power wiring and manufacturer-recommended fuse protection.

What’s in the Box

• JL Audio AP600/6 amplifier
• Manufacturer-supplied connection and installation components; exact accessory quantities not independently confirmed