Marine electronics you can trust
Furuno 520-IHD 600W 50/200 kHz Plastic In-Hull Depth Transducer - 10-Pin (520-IHD)
The Furuno 520-IHD is a 600-watt, dual-frequency in-hull depth transducer for compatible Furuno fishfinders and sonar-equipped navigation displays. Using Airmar's P79-style plastic housing, it transmits and receives conventional 50 and 200 kHz sonar through a suitable solid fiberglass hull without requiring a hole below the waterline. The wide 50 kHz beam is useful for broader bottom coverage, while the narrower 200 kHz beam helps distinguish targets and structure in shallower water. A fixed 10-pin cable connection makes this model appropriate for Furuno equipment with a matching transducer port. This is a depth-only transducer, not a temperature sensor or a CHIRP/side-scanning transducer.
Key Features & Benefits
- Shoot-through-hull mounting: In-hull installation on suitable solid fiberglass construction
- Dual frequency: 50 and 200 kHz conventional sonar
- 600W power: Designed for compatible Furuno 600W sounders
- Two beam widths: 45° at 50 kHz and approximately 12° at 200 kHz
- No hull penetration: Mounts inside the hull rather than through the bottom
- Furuno connection: Factory 10-pin sonar connector
Technical Specifications
- Part number: 520-IHD
- Transducer style: Airmar P79-type
- Mounting location: In hull, shoot-through
- Housing material: Plastic
- Sonar type: Conventional depth
- Frequency: 50/200 kHz
- Power rating: 600 W
- Nominal beam angles: 45° / 12°
- Measured quantity: Depth; no temperature sensor
- Connector: 10-pin Furuno
- Cable: Factory-attached sonar cable
- Installation requirements: Suitable solid fiberglass hull and appropriate coupling
Compatibility
For Furuno fishfinders or sonar modules that accept a compatible 10-pin 600W 50/200 kHz transducer. Some 8-pin Furuno sounders require the separately available AIR-033-073 adapter. Suitable for installation through approved solid fiberglass hulls; not suitable for all cored, metal or wood hulls.
Installation Considerations
Choose an inside-hull location with solid fiberglass and minimal turbulence below the waterline, and follow the transducer mounting and coupling-medium instructions. Confirm a clear bottom return before permanently bonding the mounting assembly.
Warranty
2-Year Limited Manufacturer Warranty