DS18 SB37BTX HYDRO 37" 200W RMS Bluetooth Marine & Powersports Amplified Soundbar with 10 Speakers

The DS18 SB37BTX HYDRO integrates an amplified ten-speaker system, Bluetooth audio, USB playback, and auxiliary input into a 37-inch clamp-mounted soundbar. Designed for compatible off-road and marine recreational installations, its rotating control panel and adjustable mounting clamps simplify positioning on roll cages and overhead bars.

Key Features

• Ten-driver arrangement: eight 3" woofers and two 1" tweeters
• Built-in 200W RMS Class A/B amplifier; 400W maximum internal-amplifier rating
• Bluetooth 5.0 audio streaming with A2DP support
• USB MP3/WMA media playback and 1A USB charging
• Auxiliary line input plus stereo RCA preamp output
• Five preset EQ selections for Bluetooth and USB sources
• Rotating front control panel (345°) and remote-control support
• Three included mounting clamp sets accommodate 1.5"–2.25" tubes
• Aluminum housing with steel-mesh grille
• IP35 environmental protection; not intended for submersion

Technical Specifications

• Nominal soundbar length: 37" (940mm)
• Speaker complement: eight 3" woofers and two 1" tweeters
• Amplifier architecture: integrated Class A/B
• Continuous amplifier power at 4 ohms: 200W RMS
• Maximum amplifier power at 4 ohms: 400W
• Advertised system peak rating: 1,200W (not continuous power)
• Frequency response: 45Hz–20kHz
• Bluetooth: version 5.0, A2DP
• USB media: MP3, WMA; USB charging output: 1A
• Stereo line output: RCA left/right, 2V
• Auxiliary input sensitivity: 720mV
• Equalizer: 5 presets for Bluetooth and USB playback
• Operating voltage: nominal 12V DC; 10–16V range
• Operating temperature: 32°F–140°F (0°C–60°C)
• Storage temperature: 5°F–176°F (-15°C–80°C)
• Protection rating: IP35
• Housing: aluminum, oxidized black finish
• Grille: steel mesh
• Control-panel rotation: 345°
• Clamp mounting: 3 sets, adjustable 1.5"–2.25" tubes
• 12V remote turn-on output: yes

Installation & Setup

• Secure the soundbar to a compatible roll bar/tower using the three clamp sets and adequate structure
• Connect to the appropriately fused nominal 12V DC supply; follow the DS18 wiring and grounding documentation
• Choose a location that allows access to controls without blocking driver visibility or overhead clearance
• Connect an external amplifier through the 2V RCA line outputs where applicable
• For exposed locations, account for the IP35 rating and avoid direct high-pressure spray or submersion

Compatibility

• Compatible with 1.5"–2.25" mounting tubes when the clamp geometry and available clearance allow
• Accepts compatible Bluetooth playback devices, USB MP3/WMA media, and auxiliary audio sources

What's in the Box

• One 37" amplified soundbar
• Three adjustable tube-clamp sets
• Remote control