Skip to product information
DS18 NXL-IQ8/WH HYDRO NXL-IQ 8" 175W RMS 2-Way Marine Speakers with Digital LED Lighting & Bullet Tweeters, White, Pair
1/10

DS18 NXL-IQ8/WH HYDRO NXL-IQ 8" 175W RMS 2-Way Marine Speakers with Digital LED Lighting & Bullet Tweeters, White, Pair

UPC: 810097266933
1 left
$ 374.95
Full Factory DS18 Warranty

Factory Authorized Retailer

25 Years of Excellence in Customer Service

The DS18 NXL-IQ8/WH HYDRO NXL-IQ marine speaker pair pairs high-output midbass drivers with floating bullet tweeters and integrated digitally controlled LED lighting. Designed for boats, UTVs, motorcycles, and other exposed audio installations, the white speakers combine water-resistant, UV-stabilized construction with a 4-ohm load for conventional marine amplifier channels.

Key Features

  • Each 8-inch speaker handles 175W RMS (350W maximum), with separate woofer and high-frequency driver sections.
  • Floating bullet tweeter promotes clear projected treble in open-air environments.
  • Digital addressable LED illumination supports dynamic lighting effects using compatible digital LED control hardware; it is not the same wiring scheme as ordinary analog RGB lighting.
  • UV-stabilized grille and composite speaker basket help resist exposure to sun and spray.
  • Pair configuration provides left/right coverage; marine-rated silicone covers are listed by DS18.
  • 4-ohm nominal impedance allows pairing with properly rated stereo or multichannel amplifiers.

Technical Specifications

  • Speaker size: 8 in.
  • Configuration: 2-way coaxial with floating bullet tweeter
  • Continuous power handling: 175W RMS per speaker
  • Maximum power handling: 350W per speaker
  • Nominal impedance: 4 ohms
  • Sensitivity (1W/1m): 96dB
  • Frequency response: 35Hz–20kHz
  • Water-resistance rating: IP65
  • Lighting: Integrated digital/addressable LEDs behind cone; 12V and digital in/out connections
  • Grille: UV-resistant injection-molded composite
  • Finish: White
  • Sales unit: Pair

Installation & System Integration

Mount in a suitable baffle with the published cutout and mounting-depth clearance; seal fasteners and route wiring away from standing water. Power the audio and digital LED functions separately using the specified connections. Set amplifier high-pass protection for exposed coaxial speakers and do not connect digital data inputs directly to analog RGB controllers.

Compatibility

For 4-ohm marine/powersports audio systems and compatible digital LED controllers. Match the mounting dimensions and digital LED wiring interface to the installation.

What's in the Box

  • Two marine coaxial speakers
  • Two silicone speaker covers

Related products