Skip to product information
DS18 NXL-10SUBLD/W HYDRO 10" 350W RMS Loaded Marine Subwoofer Enclosure with Passive Radiator and RGB Lighting, White
1/4

DS18 NXL-10SUBLD/W HYDRO 10" 350W RMS Loaded Marine Subwoofer Enclosure with Passive Radiator and RGB Lighting, White

UPC: 663593068934
1 left
$ 699.95
Full Factory DS18 Warranty

Factory Authorized Retailer

25 Years of Excellence in Customer Service

The white DS18 NXL-10SUBLD/W is a complete marine/powersports bass enclosure rather than a loose mounting subwoofer. The enclosure combines an active 10-inch woofer with a passive radiator to extend bass performance without a conventional port, alongside integrated RGB lighting and marine-oriented weather resistance.

Key Features and Benefits

  • Loaded enclosure supplies the bass driver, cabinet and passive radiator as one assembled system.
  • Passive radiator uses movement of the enclosed air to reinforce low-frequency reproduction without a vent tube.
  • 350W RMS / 700W maximum ratings are identified for DS18’s NXL-10SUBLD family.
  • Single 4-ohm load enables connection to an appropriately rated external amplifier.
  • Integrated RGB lighting provides an illuminated effect.
  • IP65-rated marine construction is intended for water-spray and outdoor exposure, not permanent submersion.

Technical Specifications

  • Enclosure type: Loaded 10-inch marine subwoofer enclosure with passive radiator
  • Active driver: 10 in.
  • Passive radiator: 10 in.
  • Power handling: 350W RMS
  • Maximum power: 700W
  • Nominal impedance: 4 ohms
  • Sensitivity: 87dB (manufacturer’s NXL-10SUBLD family listing)
  • Water resistance: IP65
  • RGB lighting: Integrated
  • Cabinet color: White

Compatibility

  • 4-ohm marine/powersports subwoofer amplifier systems; not interchangeable with the bare NXL-10SUB/WH installation format.

Installation and System Integration

  • Position and fasten the complete enclosure to a structurally suitable mounting area rather than cutting a speaker-size opening.
  • Allow safe clearance around the enclosure and audio/LED connections.
  • A suitable external amplifier and an RGB controller/power wiring are separate system requirements.

Related products