Marine electronics you can trust
Mastervolt Mac Plus 24/24-30 24V to 24V 30A DC-DC Battery Charger with CZone/NMEA 2000 (81205405)
The Mastervolt Mac Plus 24/24-30 is an intelligent DC-DC battery charger designed for maintaining a separate 24V battery bank from a 24V charging system. It accepts a nominal 24V DC input and delivers controlled charging to a nominal 24V battery bank at up to 30 amps, with a maximum output power of 850 watts. Unlike a simple fixed-voltage converter, Mac Plus uses an automatic 3-step+ charging program to properly manage a separate battery bank and protect the starter battery from unwanted discharge. Engine-running detection helps coordinate charging with modern alternators, including smart alternators, and temperature compensation and voltage sensing improve regulation. MasterBus, CZone and NMEA 2000 compatibility make it especially useful in networked marine and mobile electrical systems.
Key Features & Benefits
- Smart DC-DC charging: 24V input to 24V battery charging at up to 30A
- 3-step+ charging: Manages bulk, absorption and maintenance stages
- Smart alternator integration: Engine-run detection protects the starting battery
- High-efficiency conversion: Up to 850W output power
- Charge accuracy: Temperature compensation and battery voltage sensing
- Network monitoring: MasterBus, CZone and NMEA 2000 compatibility
- Fanless design: Quiet, naturally cooled aluminum enclosure
- Parallel expansion: Supports higher-output installations using compatible units
Technical Specifications
- Nominal input voltage: 24V DC
- Input operating range: 19–30V
- Nominal output voltage: 24V DC
- Output voltage range: 20–30V
- Maximum charge current: 30 A
- Maximum output power: 850 W
- Charging program: Mastervolt 3-step+
- Battery chemistry support: Lead-acid, AGM, gel and appropriately configured lithium
- Galvanic isolation: No
- Bidirectional operation: No
- Networking: MasterBus, CZone, NMEA 2000
- Protection rating: IP23
- Cooling: Fanless natural cooling
- Configuration: DIP switches and supported network tools
Compatibility
Designed for a nominal 24V input charging a separate nominal 24V battery system. Intended for suitably configured boat, vehicle and mobile DC systems, including smart-alternator applications. This unit is a battery-to-battery charger rather than a 120V/230V AC charger or general household AC inverter.
Installation Considerations
Protect both DC circuits with correctly sized fuses, route suitable high-current battery cables, and configure the charging profile, engine-run activation and temperature compensation for the battery installation. Use a dry protected location appropriate to IP23 equipment.
Warranty
2-Year Limited Manufacturer Warranty