Skip to product information
Lumishore ECLIPSE SL100 RGB Marine LED Strip Light, 2.5m (60-0568-2500, 010-04538-00)

Lumishore ECLIPSE SL100 RGB Marine LED Strip Light, 2.5m (60-0568-2500, 010-04538-00)

UPC: 847772004276
4 left
$99.99
Full Factory Lumishore Warranty

Factory Authorized Retailer

25 Years of Excellence in Customer Service

The Lumishore SL100 ECLIPSE 2.5m RGB LED strip light provides flexible, multicolor accent lighting for boat gunwales, seating bases, overhead details, and other indoor or exterior accent locations. Its low-profile, sealed construction helps create continuous-looking illumination in spaces where a conventional light fixture would be obtrusive.

Key Features & Benefits

  • Full-Spectrum RGB Color: Selectable red, green, and blue LED output supports varied color themes and coordinated scenes through the ECLIPSE lighting system.
  • Flexible Low-Profile Strip: The compact cross-section allows concealed illumination along trim, furniture, and protected mounting details.
  • Sealed Marine Construction: Fully encapsulated and potted construction carries an IP68 rating for dust and water protection.
  • Cut-and-Seal Installation: The strip can be trimmed at designated locations and the exposed cut end sealed using the included sealing kit.
  • Coordinated Lighting Control: The ECLIPSE Command Center allows integration with compatible MFD, smart-device, and switch controls.

Technical Specifications

  • Lighting technology: RGB, 60 RGB LED assemblies per meter
  • Strip length: 2.5m
  • Approximate total RGB LED assemblies: 150
  • Electrical connection: 4-wire RGB
  • Operating voltage: 10–15V DC (12V nominal systems)
  • Maximum current consumption: 0.5A per meter at 12V
  • Maximum current at 12V for supplied length: 1.25A
  • Average power draw: 6W per meter
  • Approximate average power for supplied length: 15W
  • Maximum supported strip length per ECLIPSE lighting zone: up to 20m
  • Ingress protection: IP68
  • Construction: fully encapsulated and potted
  • Cross-section: 10.8mm high x 4.5mm deep
  • Minimum vertical bend radius: 50mm; do not twist or bend horizontally
  • Manufacturer warranty: 3 years

Compatibility

  • Requires a compatible ECLIPSE Command Center for RGB color control and lighting-scene operation.
  • Intended for 12V nominal electrical systems; do not connect directly to 24V DC or AC power.
  • ECLIPSE strip-light control is distinct from Lumishore LUX CRGBW lighting control.

Installation & Setup

  • Plan runs around the 50mm minimum vertical bend radius, with no horizontal bending or twisting.
  • Seal any trimmed end with the supplied sealing materials before energizing the strip.
  • Mount using suitable adhesive strips or the supplied clips; protect cable connections against moisture and abrasion.

Warranty

3-Year Manufacturer Warranty.

What's in the Box

  • SL100 RGB strip light
  • Sealing kit with end caps
  • Pack of fixing clips

Related products