JL Audio MV1000/1 1,000W RMS Monoblock Class D Marine Subwoofer Amplifier with Integrated DSP (010-03335-00)

Build a capable onboard audio system with the JL Audio MV1000/1, a monoblock marine subwoofer amplifier with integrated dsp engineered for demanding marine audio applications. Rated at 1000 watts RMS total under the applicable manufacturer test conditions, it combines efficient power delivery with flexible installation options. High-output monoblock with onboard DSP, advanced thermal management and JLid networking.

Key Features

• Integrated digital signal processing (DSP) with JL Audio TüN software
• NexD2 Class D switching technology for efficient, clean output
• JLid communications for compatible system controllers and networking
• Configurable crossovers, equalization, signal routing and time alignment
• Marine-ready construction with protection-oriented thermal management

Detailed Technical Specifications

• Power @ 14.4V, 4 ohms: 600W RMS x 1
• Power @ 14.4V, 3 ohms: 800W RMS x 1
• Power @ 14.4V, 2 ohms: 1,000W RMS x 1
• Power @ 12.5V, 4 ohms: 500W RMS x 1
• Power @ 12.5V, 3 ohms: 650W RMS x 1
• Power @ 12.5V, 2 ohms: 800W RMS x 1
• Frequency Response: 12–500Hz (+0, -1dB)
• Input Sensitivity: 250mV–8V RMS (RCA)
• Preamp Output: 2 channels, 4V RMS maximum
• Recommended Power / Protection: 4 AWG minimum and external 80A fuse
• Environmental Protection: IPX2 when vertically mounted with terminals facing down
• Dimensions: 14" W x 2-1/16" H x 6-15/16" D
• Weight: 5.6 lbs

Compatibility

Compatible with appropriate marine speakers and/or subwoofers within the amplifier’s permitted impedance and power limits. DSP configuration uses JL Audio TüN; JLid-based accessories and system networking require compatible JLid components. Not a universal plug-and-play interface for other amplifier brands.

Installation Notes

Follow the model-specific JL Audio installation manual for correct conductor sizes, system fusing, mounting orientation, ventilation, load limits and signal setup. Additional wiring and installation materials may be required.

What's in the Box

• MV1000/1 mono subwoofer amplifier
• Power connector
• One 10-inch speaker output harness
• 6-foot USB Type-A to Type-B cable
• Two RCA terminal covers (installed)
• Four 1-inch stainless-steel mounting screws
• 2.5mm Allen wrench
• 3mm Allen wrench
• Connection guide
• Online registration card