Skip to product information
Furuno TM150M 300W Medium CHIRP 95–155 kHz Transom-Mount Depth & Temperature Transducer, 10-Pin, 12m Cable

Furuno TM150M 300W Medium CHIRP 95–155 kHz Transom-Mount Depth & Temperature Transducer, 10-Pin, 12m Cable

Manufacturer Part: TM150M
UPC: 611679380067
Out of stock
$389.95
Full Factory Furuno Warranty

Factory Authorized Retailer

25 Years of Excellence in Customer Service

The Furuno TM150M combines medium-frequency CHIRP fishfinding with water-temperature sensing in a compact transom-mounted plastic transducer. Its 95–155 kHz operating band and adjustable acoustic beam width are suited to finding fish and bottom structure across a range of inshore and moderate-depth fishing conditions. A factory-attached 12-meter cable terminates in a 10-pin connector for compatible Furuno sonar equipment.

Key Features & Benefits

  • Medium-Frequency CHIRP: Sweeps from 95 to 155 kHz to help compatible sounders separate targets and render bottom detail.
  • 300W Acoustic Rating: Designed for compatible 300W CHIRP sounder applications.
  • Depth and Temperature: Combines bottom sounding and water-temperature measurement in one transom assembly.
  • Transom Installation: Plastic housing avoids drilling a large thru-hull opening.
  • 10-Pin Connection: Factory-fitted 10-pin connector and 12m cable simplify connection to matched equipment.
  • Transducer ID: Supports automatic transducer identification with compatible systems.

Technical Specifications

  • Mounting type: Transom mount
  • Sonar technology: Medium-frequency CHIRP
  • Frequency range: 95–155 kHz
  • Acoustic power rating: 300W
  • Beam width: 26° to 17°
  • Manufacturer depth rating: Up to 600 ft (183 m), dependent on conditions and sounder
  • Functions: Depth and water temperature
  • Transducer ID: Supported
  • Housing material: Plastic
  • Cable length: 12 m (approximately 39.4 ft)
  • Connector: 10-pin
  • Housing dimensions: Approximately 124 x 71 x 86 mm (4.88 x 2.80 x 3.37 in)

Compatibility

For Furuno sounders and multifunction displays that support a 300W medium-CHIRP transducer and the TM150M 10-pin connection. Some modern 12-pin systems require an approved Furuno adapter or Y-cable, and not every sounder supports CHIRP operation. Confirm the exact display, sounder, and port configuration before installation.

Installation & Setup

Secure the bracket to an appropriate portion of the transom with clean water flow, avoid strakes and propeller turbulence, and route the cable away from noise-producing wiring. Verify connector compatibility and run the transducer setup procedure in the sounder. Performance varies with vessel speed, water conditions, and mounting position.

Related products