B&G DST810Smart Depth, Speed, and Temperature Multi-Sensor Thru-Hull Plastic 235 kHz Transducer (000-15735-001)
Manufacturer Part:
000-15735-001
UPC:9420064117895
1 left
$ 419.00
Full Factory B&G Warranty
Factory Authorized Retailer
25 Years of Excellence in Customer Service
Simrad IDST-810 active Depth, Speed, Temperature thru-Hull plastic 235 kHz transducer.
The 000-15735-001 (also known as the DST810 Smart™ Multisensor) is a high-performance, low-profile thru-hull transducer designed for the Navico family, including Simrad, B&G, and Lowrance systems. This all-in-one sensor replaces multiple devices by providing critical boat data through a single 51 mm (2") hole in the hull.
Key Features
5-in-1 Monitoring: Delivers precise data for Depth, Speed-Through-Water, Water Temperature, Heel, and Trim.
High-Speed Data Output: Features a 5 Hz speed output (5 updates per second), ensuring smoother speed reporting.
Integrated Attitude Sensor: Measures vessel heel and trim for performance optimization.
Wireless Configuration: Compatible with the Airmar CAST™ App, allowing users to calibrate speed and configure NMEA 2000® settings via Bluetooth.
Smart Storage: Calibration data and configurations are stored within the sensor itself.
Specifications
Acoustic Window
Urethane
Hull Deadrise
Up to 22°
Data Update Rate
Depth 1X/second
Data Update Rate
Speed 5X/second
Attitude Accuracy
+/— 1° nominal after sensor calibration
Depth Frequency
235 kHz
Minimum Depth Range
0.5 m (1.6')
Maximum Depth Range
Up to 100 m (330')—NMEA 2000®
Speed Range
Up to 45 knots
Pressure Rating
3 m (10')
Pulse Rate
20,000 p/nm* (5.6 Hz per knot)—*p/nm = pulses per nautical mile
Supply Voltage
9 VDC to 16 VDC—per NMEA 2000
Supply Current
<200 mA—per NMEA 2000®
Wireless Protocol
Bluetooth Low Energy (BLE)
Wireless Range
Up to 30 feet depending on mount location
Standard Cable Length
6 m (20') DeviceNet—NMEA 2000®
Temperature Sensor Accuracy
+/-0.5°C (+/-1.8°F)
Temperature Sensor Range
-10°C to 40°C (14°F to 104°F)
NMEA 2000 Load Equivalency Number (LEN)
3
What's in the Box
When you purchase the 000-15735-001, the package includes all the essential components for a standard thru-hull installation:
DST810 Sensor Insert: The core multisensor unit featuring the Gen2 paddlewheel.
Plastic Thru-Hull Housing: A P617V low-profile housing with a self-closing water valve.
NMEA 2000® Cable: A 6-meter (approx. 20-foot) backbone cable with a standard 5-pin Micro-C connector.
Blanking Plug: Used to seal the housing when the sensor is removed.
Installation Hardware: Includes a rubber washer and a plastic hull nut.
Documentation: Complete installation instructions and an owner's guide.