{"product_id":"mastervolt-charge-mate-pro-90-90a-electronic-charge-relay-12v-24v-dual-battery-systems-83309002","title":"Mastervolt Charge Mate Pro 90 90A Electronic Charge Relay - 12V\/24V Dual-Battery Systems (83309002)","description":"\u003cp\u003eThe Mastervolt Charge Mate Pro 90 is an intelligent electronic charge relay for managing charging between a starter battery and a separate service battery bank. When a suitable alternator or battery charger raises the starter-battery voltage, the relay permits controlled charging of the service bank while maintaining priority for the starting battery. Its current-limited operation caps charging current to the secondary battery at 90 amps, helping avoid uncontrolled current flow between banks. When charging stops, the unit isolates the batteries and blocks reverse current, reducing the risk that house loads will drain the starting battery. Automatic 12V\/24V detection, an IP65 enclosure and optional emergency-start switching make this model useful for sophisticated marine and vehicle DC systems.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled dual-bank charging:\u003c\/strong\u003e Limits secondary-bank charging to 90A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter-battery priority:\u003c\/strong\u003e Allows the starting bank to recover before combining\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnidirectional operation:\u003c\/strong\u003e Blocks reverse current from the secondary battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic voltage detection:\u003c\/strong\u003e Recognizes 12V and 24V installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid-state MOSFET control:\u003c\/strong\u003e Low voltage drop without mechanical switching contacts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-resistant enclosure:\u003c\/strong\u003e IP65-protected electronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmergency-start support:\u003c\/strong\u003e Optional bypass switch permits manual assist when installed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging arrangement:\u003c\/strong\u003e Primary starter battery and secondary service bank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal battery voltage:\u003c\/strong\u003e 12V or 24V; automatic detection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC operating voltage:\u003c\/strong\u003e 9–32V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum secondary charging current:\u003c\/strong\u003e 90 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch-on voltage:\u003c\/strong\u003e 13.5V at 12V \/ 27V at 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch-off voltage:\u003c\/strong\u003e 12.75V at 12V \/ 25.5V at 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch-on delay:\u003c\/strong\u003e 5 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch-off delay:\u003c\/strong\u003e 2.5 seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP65\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmbient temperature range:\u003c\/strong\u003e -40°C to +60°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel configurations:\u003c\/strong\u003e Supported according to Mastervolt guidance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H × W × D):\u003c\/strong\u003e 157 × 140 × 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eDesigned for dual-bank 12V or 24V systems with an AGM or gel starting battery and an AGM, gel or supported lithium service battery. This standard Charge Mate Pro version is not the lithium-starting-battery variant; those use part numbers 83304004 or 83309004. The relay does not provide shore-powered charging on its own.\u003c\/p\u003e\u003ch3\u003eInstallation Considerations\u003c\/h3\u003e\u003cp\u003eInstall between the starting and service banks with appropriate battery-side fusing and wiring sized for the charge current. The emergency-start bypass switch is optional and must be separately installed.\u003c\/p\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e2-Year Limited Manufacturer Warranty\u003c\/p\u003e","brand":"Mastervolt","offers":[{"title":"Default Title","offer_id":68252930179160,"sku":"CWR-93492","price":234.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8160\/files\/1353502.jpg?v=1794949417","url":"https:\/\/shipsound.com\/products\/mastervolt-charge-mate-pro-90-90a-electronic-charge-relay-12v-24v-dual-battery-systems-83309002","provider":"ShipSound.com","version":"1.0","type":"link"}