{"product_id":"locmarine-lm-dbs-2-dual-bilge-pump-y-splitter-for-catamarans-dual-bilge-monitoring","title":"LocMarine LM-DBS-2 Dual Bilge Pump Y-Splitter for Catamarans \u0026 Dual Bilge Monitoring","description":"\u003cp\u003e\u003cstrong\u003eSimplify Dual-Bilge Monitoring.\u003c\/strong\u003e The LocMarine LM-DBS-2 Dual Bilge Pump Y-Splitter connects two bilge-pump or switch monitoring points to a single compatible monitoring input. It is particularly useful on catamarans and vessels with more than one bilge area, where activity from either connected pump needs to be detected without using two separate monitoring inputs.\u003c\/p\u003e\u003ch3\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitor Two Bilges Through One Input:\u003c\/strong\u003e Connect two bilge pumps or compatible switch signals to one monitoring input, supporting installations with separate port and starboard bilge areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombined Activity Detection:\u003c\/strong\u003e Activity from either connected bilge can be detected through the shared input. The system does not identify which individual pump or bilge activated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Connections:\u003c\/strong\u003e Pre-molded, factory-terminated connectors are intended to connect to compatible bilge monitoring wiring without manual wire splicing or heat-shrinking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67-Rated Connector Assembly:\u003c\/strong\u003e Water- and dust-resistant construction is suited to appropriately installed marine electrical connections, including moisture-prone compartments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Y-Splitter Layout:\u003c\/strong\u003e The short cable assembly is convenient where bilge components and wiring routes occupy limited space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Dual bilge-pump monitoring Y-splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Configuration:\u003c\/strong\u003e Two monitored bilge-pump\/switch connections combined into one monitoring input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Construction:\u003c\/strong\u003e Factory-terminated, molded plug-in connection assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress Protection:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal System Application:\u003c\/strong\u003e 12V DC marine monitoring circuits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate Listed Dimensions:\u003c\/strong\u003e 10 x 2 x 1 in. (retailer-provided product dimensions)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate Listed Weight:\u003c\/strong\u003e 0.03 lb (retailer-provided product weight)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended Use:\u003c\/strong\u003e Catamarans and multi-compartment or dual-bilge monitoring installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntended for compatible LocMarine boat-monitoring and bilge-sensor input configurations; use the appropriate hub and connector arrangement.\u003c\/li\u003e\n\u003cli\u003eTwo bilge activity signals share a single input. A combined alert cannot distinguish port from starboard or identify which connected pump triggered.\u003c\/li\u003e\n\u003cli\u003eThis is a monitoring connection accessory, not a pump controller or an independent alarm. Existing pump switching, operation, and circuit protection remain separate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation \u0026amp; Setup\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCheck mating connector configuration and the LocMarine hub wiring arrangement before installation.\u003c\/li\u003e\n\u003cli\u003eConnect the two intended monitored circuits to the splitter and route the common connection to the applicable monitoring input, following the system instructions.\u003c\/li\u003e\n\u003cli\u003eSecure cabling away from moving equipment, sharp edges, and excessive heat. Protect connectors from continuous submersion despite the IP67 rating.\u003c\/li\u003e\n\u003cli\u003eTest each bilge pump or float switch separately to verify the shared input detects either activation. Do not expect the app to label the individual pump that activated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003e1-Year Manufacturer Warranty with Lifetime Support.\u003c\/p\u003e","brand":"LOCMARINE","offers":[{"title":"Default Title","offer_id":68009757409368,"sku":"CED-LOCLM-DBS-2","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1091\/8160\/files\/4315136.jpg?v=1793141301","url":"https:\/\/shipsound.com\/products\/locmarine-lm-dbs-2-dual-bilge-pump-y-splitter-for-catamarans-dual-bilge-monitoring","provider":"ShipSound.com","version":"1.0","type":"link"}