Sale

PAC AOEM-CHR2 Chrysler/Dodge/Jeep Premium Sound System Interface

$ 53.99 $ 44.95

Brand: PAC

The PAC AOEM-CHR2 Sound System Interface is a "specific application" Kit of the PAC OEM-1 interface. It allows for the replacement or addition of an amplifier in compatible vehicles with a premium sound system.

Do you have a Premium factory sound system? If so, with this kit, you can easily:

  • Replace the factory amplifier(s) and keep the factory stereo or
  • Keep all of the factory system and add amplifiers (up to 4 channels)

This AOEM Kit includes:

  • (1) PAC OEM-1 main unit
  • (1) AMP-RCA harness
  • (1) ADD-CHR2 harness

The OEM-1 interface is transformer isolated, maintains phase and is linear from 20 to 20,000 Hz. This 4-channel interface will allow the output to be adjusted to the input requirements of the new amplifier, providing 2:1 gain and infinite attenuation. The input connectors plug into the factory stereo and vehicle harness. The 4 female RCA output jacks plug into the new amplifier. Comes complete with amplifier trigger wire. Just like the factory stereo system, the warning chimes will play through the front left RCA output of the interface. Also, turning on the rear entertainment controls, if so equipped, will make the rear outputs of the interface play a second audio source.

Everything just plugs together (Plug & Play). When you want to take out whatever you added or changed, just unplug it and plug in the old factory stuff. The vehicle is back to factory condition. You can use the amplifier you added in your next leased or purchased vehicle.

The OEM-1 also gives you 2:1 gain as well as infinite attenuation. This allows signal adjustment to the correct level between the factory system and what is being added or changed. All four channels are individually adjusted for accurate sound levels. Each channel completely isolates the aftermarket equipment from the factory system to give 100% compatibility in every installation.

Features:

  • "plug and play" solution - no need to cut wires
  • Provides a 4 channel RCA output when adding an additional amplifier
  • Signal ground is also isolated to avoid ground loops
  • 4 channel, transformer isolated and adjustable Line Output Converter
  • All four channels are individually adjusted
  • Linear from 20-20,000 Hz (+/- 0.5dB)
  • Maintains correct phase

To replace the premium factory amplifier:
ADD cable plugs into the factory harness and into the OEM-1. The second cable is the AMP-RCA. This cable plugs into the OEM-1 and has 4 channels of RCA output (using RCA jacks) and the trigger lead needed to turn on the amplifier(s). Run RCA leads and trigger extension to amplifier from the AMP-RCA. Run main amplifier power directly from battery. Connect speaker outputs of amplifier to factory or aftermarket speakers. Adjust the potentiometers on the OEM-1 and the installation is complete.

To add an amplifier to the premium factory system:
You can leave the premium factory system in place and add up to 4 channels of amplification with simple plug ins. ADD cable plugs into the existing factory harness and the OEM-1. The second cable is the AMP-RCA. As above it plugs into the OEM-1 and has 4 channels of RCA output and the trigger lead needed to turn on the amplifier(s). Run RCA leads and trigger extension to amplifier from the AMP-RCA. Run main amplifier power directly from battery. Connect speaker outputs of amplifier to factory or aftermarket speakers. Adjust the potentiometers on the OEM-1 and the installation is complete.

Click here to see the most current application guide

NOTE: If you do not see your vehicle listed below or need assistance getting the right product, call PAC Technical Support at (800) 854-3133 to find out which PAC product is right for your vehicle.

Compatibility List:

General: Most Chrysler/Dodge/Jeep models 2002 & Up with Infinity Premium Sound System (Non-CAN Bus vehicles)

Chrysler 300 2005-2006 (ONLY IF PREMIUM AMPLIFIER IS NOT PRESENT. If the premium amplifier is present use the C2A-CHY)
Chrysler 300M 2002-2003
Chrysler Concorde 2002-2003
Chrysler LHS 2002-2003
Chrysler PT Cruiser 2002-2003
Chrysler Sebring sedan & convertible 2002-2003
Chrysler Town & Country 2002-2006
Chrysler Voyager 2002-2003
Dodge Charger 2005-2006 (ONLY IF PREMIUM AMPLIFIER IS NOT PRESENT. If the premium amplifier is present use the C2A-CHY)
Dodge Dakota 2002-2006
Dodge Durango 2002-2004
Dodge Durango 2005-2006 (ONLY IF PREMIUM AMPLIFIER IS NOT PRESENT. If the premium amplifier is present use the C2A-CHY.)
Dodge Intrepid 2002-2003
Dodge Magnum 2005-2006 (ONLY IF PREMIUM AMPLIFIER IS NOT PRESENT. If the premium amplifier is present use the C2A-CHY)
Dodge Ram 2002-2005
Dodge Ram 2006 (ONLY IF PREMIUM AMPLIFIER IS NOT PRESENT. If the premium amplifier is present use the C2A-CHY)
Dodge Stratus sedan 2002-2003
Jeep Commander 2005-2006 (ONLY IF PREMIUM AMPLIFIER IS NOT PRESENT. If the premium amplifier is present use the C2A-CHY)